Welcome to Wheel Loaders Page
Recent Posts On Wheel Loaders
Wheel Loaders « Previous EntriesLiebherr introduces new 6th generation of wheeled loaders
Tuesday, February 19th, 2008The successful range of large Liebherr wheeled loading shovels, with tipping loads of over 15 tonnes, has been replaced by a newly developed 6th Generation range of machines. The L 564 2plus2, L 574 2plus2 and L 580 2plus2 wheeled loaders have been replaced by the new models L 566 2plus2, L 576 2plus2 and […]
Atlas test world’s first hybrid-power loader
Tuesday, February 19th, 2008The world’s first hybrid wheel loader has been developed by heavy plant maker Atlas-Weyhausen in conjunction with engine maker Deutz of Germany.
Earmarked for production in 2010, the new machine is said to reduce fuel consumption by up to twenty per cent while reducing harmful emissions accordingly.
Unlike hybrid cars, the vehicle starts and runs normally on […]
Lokotrack LT106 mobile jaw plant available from Metso Minerals
Tuesday, February 19th, 2008The original Lokotrack range has now been complemented with a new, efficient jaw plant, the Lokotrack LT106.
Due to its new jaw crusher, the LT106 takes primary crushing capacity to a new level.
The global launch of the Lokotrack LT106 will be organised during the ConExpo exhibition in Las Vegas, USA, during March 11-15, 2007.
The new LT106 […]
NEW CATERPILLAR 990H WHEEL LOADER- (CAT 990H)
Tuesday, February 19th, 2008 The 990H Wheel Loader from CAT® have low emission engine, advanced cooling circuit and a more comfortable driving unit.
The New Caterpillar 990H Wheel Loader - (CAT 990H). […]
Tyre protection chains and seating systems from RUD Chains Australasia
Tuesday, February 19th, 2008RUD Chains Australasia has recently introduced a new range called the Terra range of forestry traction chains. These chains are manufactured from high quality alloy steel. There are minimal ground disturbances that occur with these types of traction chains. These traction chains are eco-friendly, fit easily and are fabricated with side tensioning chain which is […]
Case Adds 621E Wheel Loader to E Series Line
Tuesday, February 19th, 2008Case Construction Equipment has introduced the Case 621E wheel loader, the newest member of the E Series line. Like other Case E Series wheel loaders, the 621E features an electronically controlled engine that provides increased efficiency and a new cab that offers greater operator comfort and visibility. The new Case 621E wheel loader also delivers […]
Liebherr introduces new 6th generation of wheeled loaders
Tuesday, February 19th, 2008The successful range of large Liebherr wheeled loading shovels, with tipping loads of over 15 tonnes, has been replaced by a newly developed 6th Generation range of machines. The L 564 2plus2, L 574 2plus2 and L 580 2plus2 wheeled loaders have been replaced by the new models L 566 2plus2, L 576 2plus2 and […]
Volvo F-series wheel loaders from CJD Equipment
Tuesday, February 19th, 2008Newly released F-series wheel loaders from Volvo underline the company’s continued leadership of the equipment category it helped pioneer more than 50 years ago.
The new L60F, L70F and L90F machines have achieved new standards in cycle times, noise reduction, transmission smoothness, operator comfort, engine emissions and visibility.
They also reinforce Volvo’s reputation for providing versatile, high […]
Tool carrier model joins D Series
Tuesday, February 19th, 2008CASE Construction has added the 721D XT tool carrier to its D Series wheel loader line. It features a new loader arm design for improved visibility, increased material retention and improved stability. At 14,300 kg and 137 kW, the new 721D XT is the largest tool carrier model in the Case range.
The operator’s line of […]
Automation options enhance tool resharpening
Tuesday, February 19th, 2008A seven-station wheel changer is one of two automation enhancements added to a tooling resharpening machine to raise flexibility and productivity.
ANCA has developed two automation enhancements for its GX7 resharpening machine to deliver new levels of flexibility and productivity to the tool regrinding industry. A seven-station wheel changer has been added to the GX7 to […]